For the electronical protection of homes and small commercial buildings, the IP burglar-alarm system CCS5000 is a very adequate and reliable solution.

An important asset of the CCS5000 is the fact that it can be switched on or off completely or in part, distributed over 4 different areas. This provides extra protection, if some of the persons present cannot watch the other spaces of the home or office building.

Technical overview:

• Alarm transmission via IP and GPRS
• Designer control panel, with soft touch and keytag controls
• The controls can be adapted to fit personal taste and to match interior design
• Easily accessible through Web-User Interface
• Standard 8 inputs, maximum 16 inputs
• Induction loop monitoring, EOL, DEOL and Anti Mask settings for each input
• 2 monitored outputs (siren/flash), maximum 16 outputs
• 50 users, 4 areas and 1500 memory log files
• Maximum 4 controls (code and/or Mifare)
• Maximum 4 admission card readers (4 doors)
• Controlled by wire, wireless (hybrid) or through domotics
• Easily programmable and manageable through WinCCS software
• Easy remote control with the CCS app
• Complies with EN50131 and EN50136

Compact

The CCS5000 series consists of a burglar and robbery system in a narrow plastic casing that will fit in any meter box.

Continuity
The CCS5000 is equipped with an emergency power supply, that guarantees proper functioning of the alarm system if the mains voltage fails.

Scalable
The CCS5000 has 8 standard inputs. These can be extended to 16 inputs, with an extra 8 wired or wireless detectors.

Easy access control
The system can be easily controlled through a Web-user interface. The CCS5000 can handle 50 users, distributed over 4 areas. Each of these areas can be switched on or off independently, thereby achieving maximum flexibility.

Design made to measure
If you value your interior design, the CCS5000 has a lot to offer. The design of the controls can be fully adapted to match the style and the interior design of a home or office. It is also possible to fully integrate the controls into the interior.

Admission control
Admission on location can be controlled by designer admission card readers. The readers are connected to the communication ports of the system.

Programming, management and monitoring
Programming, management and monitoring can easily be done through the WinCCS software and/or the Remote Management System (RMS).

Remote admission and control

The mCCS app allows for easy remote control of the alarm system by smartphone or tablet. The app can also render the video streams from the cameras that are connected to the CCS5000. The user-friendly web-user interface allows users to easily control the user codes, domotics and other functions of the system.

Domotics
The integration with domotics allows e.g. for control of lighting or sunscreens through the CCS5000, which makes the system even more pleasant. These options are also available through the mCCS app.

Wireless detection
If wired connections are difficult to realise, wireless detection can be connected to the CCS5000.

Compatibility with (other) systems
The CCS5000 is compatible with most common means of detection, such as magnetic contacts, motion detectors, smoke detectors, broken-glass detectors, active infrared detectors, radar etc.
This allows for protection to measure for each home and commercial building.

Alarm forwarding through IP

Homes and small commercial buildings often have broadband communication (IP). The CCS5000 is equipped with IP alarm forwarding, and comes with the option for integrated GPRS back-up.

For more information on IP burglar alarm systems, contact us . We will gladly advise you on equipment that fits your particular situation.