For the electronical protection of commercial buildings and other professional objects, the IP burglar-alarm system CCS7000 is the safest and most reliable solution. The system is used widely in retail, in SMEs and in industrial buildings.
Because of the modular setup of CCS7000, efficient protection is easier than ever, and it allows for growth. The system can be used with hardly any restrictions, and it can be integrated with most common detection systems.
Extra suitable for retailers with chip-and-PIN devices
In situations with high-risk objects (EN50136), alarms are forwarded through a (closed) IP connection with GPRS back-up. The IP connection of the CCS7000 alarm system allows for the connection of a chip-and-PIN device. Should, for whatever reason, the primary connection of your chip-and-PIN device fail, transactions can still be performed by automatically switching over to the GPRS back-up connection.
Compact and widely applicable
The CCS7000-series consists of a burglar and robbery system in a robust metal casing, and it complies with the highest European standards EN50131 and EN50136 Grade 3. This means that this system can be used for low-, medium- and high-risk objects.
The CCS7000 is equipped with an emergency power supply, that guarantees proper functioning of the alarm system if the mains voltage fails.
The CCS7000 has 8 standard inputs. These can be extended to 512 inputs for optimum burglary detection, 32 of which are wireless inputs. There are 4 outputs, that can be extended to maximum 256 outputs. The in- and outputs are coupled for several programmable technical controls.
Easy access control
Through a Web-user interface, the system can be easily controlled with a four- or six-digit code. The CCS7000 can handle 1024 users, distributed over 64 areas. Each of these areas can be switched on or off independently. This means that the alarm for each area can be switched on or off independently.
Design made to measure
If you value your interior design, the CCS7000 has a lot to offer. The design of the controls can be fully adapted to match the style and the interior design of a home or office. It is also possible to fully integrate the controls into the interior.
Admission control card readers allow access to the alarm system. The readers can be connected by wire or wireless to the communication ports of the system.
Remote admission and control
The mCCS app allows for easy remote control of the alarm system by smartphone or tablet. The app can also render the video streams from the cameras that are connected to the CCS7000. The user-friendly web-user interface allows users to easily control the user codes, domotics and other functions of the system.
Programming, management and monitoring
Programming, management and monitoring can easily be done through the WinCCS software and/or the Remote Management System (RMS).
The integration with domotics allows e.g. for control of lighting or sunscreens through the CCS7000, which makes the system even more pleasant. These options are also available through the mCCS app.
If wired connections are difficult to realise, wireless detection can be connected to the CCS7000.
Compatibility with (other) systems
The CCS7000 is compatible with most common means of detection, such as magnetic contacts, motion detectors, smoke detectors, broken-glass detectors, active infrared detectors, radar etc.
This allows for protection to measure for each home and commercial building.
Alarm forwarding through IP
The CCS7000 is equipped with IP alarm forwarding, and comes with the option for integrated GPRS back-up (AL1, AL2 and AL3) for alarm forwarding to a monitoring room or emergency centre.
For more information on IP burglar alarm systems, contact us. We will gladly advise you on equipment that fits your particular situation.